Equipment Main features:
1) with two Japanese Mitsubishi, Panasonic and other extrusion module and Japanese soldiers God pump composed of high precision double extrusion coating machine, a can be high-speed pole piece is coated on both sides, high coating efficiency, thickness, online measurement, CCD photography fringes tracking online configuration measurement;
2) using intelligent PLC control, precise control of flow, coating weight of high precision, all intelligent control;
3) the coating speed is high, with the corresponding efficient drying box, the design speed of up to 15 ~ 36m/min;
4) coating die with a gasket structure, can be gap coating, box coating, continuous coating;
5) according to the size, viscosity and solid content of the slurry, it can be applied to thin and thick coating;
6) coated with a width of 650mm and a wider range of coating;
7) floating type oven, greatly improve the actual speed of coating;
8)Winding and unwinding can be configured to automatically change the volume without stopping machine
Technical parameters:
1) maximum coating width: 650mm, under the gasket can be adjusted;
2) Coating speed: 5 ~ 36m/min,70m/min, (with the length of the slurry and drying);
3) The dry coating thickness of one-sided error: ≤ ± 1um;
4) The minimum gap clearance: 8mm (with pulp and coating speed, viscosity of the material);
5) The positive and negative weight error: ≤ ± 0.5mm;
6) coated front and back edge of the error: ≤ ± 0.5mm;
7) length error: ≤ 0.5mm;
8) roll back garden beat: ≤
1um;
9) extrusion die lip straightness: 2um / m;
10) drying box: each 3M, Layer
2 ,length 24M/30M/36M/40M/56M.