Equipment Main features:  

1) is suitable for the square cell pole piece production in the continuous coating and the gap coating pole piece carries on the pole piece molding, the pole piece of piece of brush piece (brush piece custom);          

2 pole piece with gas up roll, and with automatic deviation correction, automatic volume control;          

3) the drive shift motor is driven by servo step, fixed length feeding, high precision of feed length, and stable;          

4) using die cutting or punching way to carry out the pole piece;          

5) discharging automatic separation material and electrode plate;          

6) press the head with 4 link, 8 guide pillar of the punch movement way , the pressure is stable, the punching die life is long.          

7) die adjusting electric adjusting mold, die cutter and belt conveying can not be crushed.          

8) this machine has a pole piece of the volume, deviation correction, measurement, punching, punching and cutting, double-sided brush, press and suction, and the suction disc function, to reduce the contact of the pole piece.           

9) specifications: width 520mm, 650mm specifications          

10) the equipment form: the knife mold is the laser knife mold (DYG-149B) and the blanking die (DYG-149A).

DYG-149A pole piece automatic punching machine:
Maximum forming area: 350 × 300mm
Feeding width: 350mm
Molding Size: ± 0.05mm